fuzetec no. pq09 - 1 01e product specification and approval sheet version 2 page 1 / 3 note : specification subject to change without notice. radial leaded ptc resettable fuse : frh series 1. summary (a) rohs compliant (lead free) product (b) applications : wide variety of electronic equipment (c) product features : low hold current solid state, radial leaded product ideal for up to 60v/250v/600v (d) operation cu rrent : 80ma~180ma (e) maximum voltage : 60v/250v/600v (f) temperature range : - 40 to 85 2. agency recognition ul : file no. e211981 c - ul: file no. e211981 t v: file no. r 50021651 3. electrical characteristics (23 ) resistance tolerance hold current maximum current max oper. voltage max int. voltage r min r 1 m ax part number i h , a i max , a v max , vdc v i - max , v frh080 - 250u f 0.08 3.0 60 250 14.0 33.0 frh080 - 250 f 0.08 3.0 60 250 14.0 33.0 frh110 - 250u f 0.11 3.0 60 250 5.0 16.0 frh110 - 250 f 0.11 3.0 60 250 5.0 16.0 frh120 - 250u f 0.12 3.0 60 250 6.0 16.0 frh120 - 250 f 0.12 3 .0 60 250 4.0 16.0 frh145 - 250u f 0.15 3.0 60 250 3.5 12.0 frh145 - 250 f 0.15 3.0 60 250 3.0 12.0 frh180 - 250u f 0.18 10.0 60 250 0.8 4.0 frh180 - 250 f 0.18 10.0 60 250 0.8 4.0 frh150 - 600 f 0.15 3.0 60 600 6.0 22.0 frh160 - 600 f 0.16 3.0 60 600 4.0 18.0 i h =ho ld current - maximum current at which the device will not trip at 23 still air. v max =maximum operating voltage at which the device can withstand without damage at its rated current. v i - max = maximum interrupt voltage device can withstand for short period of time. (not for long term.) i max = maximum fault current device can withstand without damage at rated voltage (v max ). r min =minimum device resistance at 23 . r1 max =maximum device resistance at 23 1 hour after tripping . physical specifications: lead material: frh080 - 250 f ~ frh180 - 250 f tin plated copper,22 awg. frh150 - 600 f ~ frh160 - 600 f tin plated copper,22 awg. soldering characteristics:mil - std - 202, method 208e. insulating coating:flame retardant epoxy ,meet ul - 94v - 0 requirement. note : all frh products are designed to assist equipment to pass itu, ul1950 or gr1089 sp ecification. caution : frh devices are not intended for continous use of line voltage such as 120 vac ~ 600vac and above. atom electronics ltd.
fuzetec no. pq09 - 1 01e product specification and approval sheet version 2 page 2 / 3 note : specification subject to change without notice. 4. production dimensions (millimeter) lead size :22awg, $ 0.65 mm diameter lead size : 22awg, $ 0.65 mm diameter a b c d e part number fig maximum maximum typical minimum maximum frh080 - 250u f 1 5.1 9.1 5.0 4.7 3.8 frh080 - 250 f 1 5.8 9.6 5.0 4.7 4.6 frh110 - 250u f 1 5.9 9.4 5.0 4.7 3.8 frh110 - 250 f 1 6.8 9.9 5.0 4.7 4.6 frh120 - 250u f 2 6.0 10.0 5.0 4.7 3.8 frh120 - 250 f 2 6.5 11.0 5.0 4.7 4.6 frh145 - 250u f 2 6.0 10.0 5.0 4.7 3.8 frh145 - 250 f 2 6.5 11.0 5.0 4.7 4.6 frh180 - 250u f 2 10.4 12.6 5.0 4.7 3.8 frh180 - 250 f 2 10.9 12.6 5.0 4.7 4.6 frh150 - 600 f 2 13.5 12 .6 5.0 4.7 6.0 frh160 - 600 f 2 16.0 12.6 5.0 4.7 6.0 5. thermal derating curve thermal derating curve - frh lead free series 0% 50% 100% 150% 200% -40 -20 0 20 40 60 80 ambient temperature (c) p e r c e n t o f r a t e d h o l d a n d t r i p c u r r e n t a b a b a= frh180 - 250uf frh180 - 250f b= all other frh devices a tom e lectronics l td.
fuzetec no. pq09 - 1 01e product specification and approval sheet version 2 page 3 / 3 note : specification subject to change without notice. 0.01 0.1 1 10 100 1000 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 t i m e - t o - t r i p ( s ) fault current (a) g f e d c b a 6. typical time - to - trip at 23 7. material specification lead material ! tin plated copper, 22 awg. soldering characteristics:mil - std - 202, method 208e. insulating coating:flame retardant epoxy, meets ul - 94v - 0 requirement 8. part numbering and marking syst em part numbering system part marking system f r h " " " # " " " u f rohs compliant / lead free maximum interrupt voltage rating current rating example * frh150 - 600 f marking : rh6150 f * frh160 - 600 f marking : rh6160 f warning: - operation beyond the specified maximum ratings or improper use may result in damag e and possible electrical arcing and/or flame. - pptc device are intended for occasional overcurrent protection. application for repeated overcurrent condition and/or prolonged trip are not anticipated. - avoid contact of pptc device with chemical solvent. prolonged contact will damage the device performance. a=frh080 - 250uf & frh080 - 250f b=frh110 - 250u f & frh110 - 250 f c=frh120 - 250u f & frh120 - 250 f d=frh145 - 250u f & frh145 - 250 f e=frh180 - 250u f & frh180 - 250 f f=frh150 - 600 f g=frh160 - 600 f f rh110 f 4 1ab unencapsulated part f fuzetec logo rh " " " f product family " " " " date code/lot number p art identification rohs compliant / lead free a tom e lectronics l td.
|
